Construction work is never easy; after all, if both the owner and the contractors have to touch dirt to refurbish a home or an establishment, they may do so just to get the job done. In one way or another, certain parts of a property may be excavated or trenched to perform certain repairs or renovations. Of course, not all renovations need excavation to be successful, but that would all depend on the extent of the project.
The thing about excavation and trenching is that many people often refer to them interchangeably. While they both deal with ground treatment, they have certain differences that really bring out their significance within a construction project.
Suppose you are a property owner yourself, and you were told by your contractor that excavation and trenching will be done on your property. In that case, you may need to familiarize yourself with some helpful concepts first. By knowing the most important ones, you can be sure that the process will be made clearer and more practical in the long run.
Below are just some of the basics that may assist your understanding of the two’s impact on your project:
Their main differences lie in the floor space that they tend to occupy. Excavation is all about digging out a huge area where certain piping systems or basement amenities will be installed. Of course, many other refurbishing and renovation methods utilize this process, and all of that will depend on your property’s needed fixes.
On the other hand, trenching is all about digging out a small linear space. This may also be done while setting up a piping system below your property or establishment. However, it isn’t as extensive as other major construction projects due to its smaller floor space.
The task of digging is easy, but the safety that goes along with it is a lot harder than it looked. Although you may fit the contractors with helmets and other safety gear, they won’t be completely free from danger. As long as the digs are more than six feet under, a strategy should be set in place to ensure everyone knows what to do in the offset of sudden soil erosion.
Why should your contractors dig? Does the extent of the renovation process warrant it that much? How can you even minimize the risk? These questions are better answered if you have a clear goal in mind. This is somewhat connected to the second pointer, but this is more specific and detailed than the other one.
By clarifying this phase even before your contractors would begin their trenching or excavation, you may prevent any possible accident or plans that may otherwise hinder the progress of the renovation project.
The act of excavation and trenching has a few important aspects that must be addressed by the property owner and the contractors early on. While it may just seem like a simple phase in construction, you must always remember that safety should always be a priority.
By familiarizing yourself with their differences, their required plan, and the prerequisite goal for the project, you may be able to implement a dig-up that is both safe and efficient until the last day of excavation.If you are looking for contractors who offer excavating services in Southeast Alberta, look no further than our expertise here at DL Nagel Excavating. We are a full-service excavating company with 30 years of extensive experience specializing in acreage development, demolition services, basement services, hydrovac services, amongst other things. Contact us today and let us work on your renovation for you.